Requisite Audio Engineering L2M MKIII M/S VERSION Manuel de l'opérateur télécharger pdf (Page 11)

FRONT PANEL CONTROLS (center row)

MID

With the MID control pulled out and in the fully-clockwise position, center is normal. Fully-

counterclockwise Mid disappears. At the 12 o’clock position 3-4dB of make-up gain will be re-

quired to compensate for loss.

MID - OPERATIONAL NOTE:

MID-SIDE on the L2M is musically effective for tracks containing material recorded using stereo

microphones. As an example, stereo drum overheads, stereo background vocals, room mics.

The stereo output of a chorus pedal or stereo keyboard are not going to be effected in the same

manner.

For initiating Mid/Side functions the MID control must be in the OUT or PULLED position.

With the MID control pushed “IN” MID-SIDE is fully disengaged.

SIDE

When the SIDE control is at it’s fully-counterclockwise position, left is left and right is right (L/

R). At the 12 o’clock position, both left and right are in center (mono). At it’s fully-clockwise

position the image is “ﬂipped”, left is on the right and right is on the left (R/L). The side con-

trol is continuously variable and adjusted in conjunction with the MID control.

STEREO LEVEL RIDE

Manual ﬁne adjustment of level is a useful holdover from the old-school of mastering and is a

good way to go when wanting to avoid level changes in the digital domain. Having a total

range of 6dB, STEREO LEVEL RIDE is ideal for manual adjustment of level transitions from

various sections of the program material. Stereo tracking of this dual-ganged pot is extremely

accurate and holds a tolerance within 0.2dB throughout it’s entire range.

STEREO LEVEL RIDE - OPERATIONAL NOTE:

If needing to adjust track level both up and down, use the -3dB point as your average level, this

will allow for increase or decrease of level as needed.

THE L2M MKIII M/S VERSION

R e q u i s i t e A u d i o E n g i n e e r i n g! L2M MkIII

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Pas de commentaire

Requisite Audio Engineering L2M MKIII M/S VERSION Manuel de l'opérateur Page 11